Home | Contact Us | Site Map

TRADE SHOW

REQUEST FOR PROPOSAL

ENGINEER FEEDBACK

OPERATOR FEEDBACK

VISIT US ON

PRODUCTS

» Retractable
Injectors/Diffusers

High Corrosion
Resistance Injectors

» Non-retractable
Injection Quills

No Check Valve (Standard)

With Check Valve

With Check Valve & QR Coupling

Open Channel Diffusers

» Sampling Probes

Retractable Sampling Probe

Non-Retractable Sampling Probe

EB-191

Home » Products » Retractable Injectors » 150 psi. rated » EB-191

SolidWorks eDrawings (EPRT) file is available. Email us and we will send you the file.

*SolidWorks Explorer or eDrawings is required to view the 3D drawings. You can download the software here.

Retractable Injection Quill Rated to 150 psi

1-1/4" Brass “BallCorp” Stop
3/4" Solution Tube
Brass Solution Tube Adaptor
Brass Packing Nut
300 Series O-Ring Gasket
150 psi Rated Stainless Steel Restraint Hook
Stainless Steel Limit Chain

Please see EB-191 data sheet (PDF) for more information.

A flexible hose assembly can be added to most injectors. Please see Flexible Hose Assembly page for more information.

Ordering Information

Sample Part Number: EB-191-B-P-(Specify)-0

Series

Valve/Compression
Material

Solution Tube
Material

Insertion Length

Tip Configuration

Optional Check
Valve

Flexible Hose
Assembly

EB-191-

B =

Brass

P =	PVC
C =	CPVC
S =	Stainless Steel
H =	HASTELLOY® C
A =	Alloy20
T =	Titanium G2

(Specify)

Note: PVC, CPVC models have a maximum warranted insertion length of 8 inches. Consult factory for lengths greater than 8 inches.

0 =	Standard
B =	45° Bevel
DH=	Diffuser Holes

00 =	No Check Valve
01 =	PVC/Viton
02 =	PVC/EPDM
03 =	CPVC/Viton
04 =	CPVC/EPDM
05 =	Alloy

Note: Check Valve will be same material as solution tube.

See Flexible Hose Assembly product page for ordering options.

(Pressure ratings for flexible hose assemblies may differ from rating of the injector)

CA and VT compliant NO-LEAD brass main connections are available. Indicate "-NL" at the end of the model number.

Technical Notes

PVC and CPVC Solution Tubes are Schedule 80 pipe with an O.D. of 1.050 inches and an average I.D. of 0.722 inches.
Alloy Solution Tubes are Schedule 40 pipe with an O.D. of 1.050 inches and an average I.D. of 0.722 inches. Schedule 80 Alloy Solution Tubes are available upon request - consult factory for details.
Saf-T-Flo does not recommend nor warranty PVC/CPVC Solution Tubes where velocities in the process main exceed 6 fps.
Main Connection and Inlet Connection are NPT by default. AWWA and BSP thread options are available. Consult factory for details.