IQ-Series
Home
» Products » Non-Retractable Injection Quill
» With Check Valve
» IQ-Series
|
|
SolidWorks eDrawings (EPRT) file is available. Email us and we will send you the file.
*SolidWorks Explorer or eDrawings is required to view the 3D drawings. You can download the software here.
|
Non-Retractable Injection Quill with Check Valve
- Available in 1/2" and 3/4" MNPT main connection sizes
- Standard pump discharge line connection is 1/2" MNPT
- Integrated spring loaded ball check valve
- Hastelloy® C, Alloy 20, or Stainless Steel springs available
- EPDM or Viton Seats
- PVC, CPVC Injection Quills rated to 150 psi.
- Stainless Steel, Alloy 20, Titanium, and Hastelloy® C Injection Quills rated to 1500 psi.
Please see IQ-Series, IQ-50 or IQ-75 data sheet (PDF) for more information.
Ordering Information
| Sample Part Number: IQ-50-V-5-6-P-H |
| |
Main Connection | |
Seal Type | |
Inlet | |
Insertion Length | |
Solution Tube Material | |
Spring Material |
| IQ- |
| - |
| - |
| - |
| - |
| - |
|
| |
|
|
| V = | Viton |
| E = | EPDM |
| K = | Kalrez® |
| |
| |
(Specify)
Note: PVC models have a maximum warranted insertion
length of 6 inches. Consult factory for lengths greater than 6 inches. | |
| P = | PVC |
| C = | CPVC |
| S = | Stainless Steel |
| H = | HASTELLOY® C |
| A = | Alloy20 |
| T = | Titanium G2 |
| K = | PVDF |
| |
| S = | Stainless Steel |
| H = | HASTELLOY® C |
| A = | Alloy 20 |
|
*Please consult factory for IQ-75 in alloy configurations
Technical Notes
- PVC and CPVC Solution Tubes are Schedule 80 pipe with an O.D. of 0.675 inches and an average I.D. of 0.403 inches.
- Alloy Solution Tubes are Schedule 40 pipe with an O.D. of 0.540 inches and an average I.D. of 0.344 inches.
- Saf-T-Flo does not recommend nor warranty PVC/CPVC Solution Tubes where velocities in the process main exceed 6 fps.
- PVC/CPVC models are rated to 150psi. Alloy models are rated to 1500 psi.
|
PRODUCTS