Home | Contact Us | Site Map

TRADE SHOW

REQUEST FOR PROPOSAL

ENGINEER FEEDBACK

OPERATOR FEEDBACK

VISIT US ON

PRODUCTS

» Retractable
Injectors/Diffusers

High Corrosion
Resistance Injectors

» Non-retractable
Injection Quills

No Check Valve (Standard)

With Check Valve

With Check Valve & QR Coupling

Open Channel Diffusers

» Sampling Probes

Retractable Sampling Probe

Non-Retractable Sampling Probe

SP-100

Home » Products » Sampling Probe » Retractable » SP-100

SolidWorks eDrawings (EPRT) file is available. Email us and we will send you the file.

*SolidWorks Explorer or eDrawings is required to view the 3D drawings. You can download the software here.

Retractable Sampling Probe – 150 psi Rated

1" Brass Ball Valve
1/2" Sampling Probe
Brass Solution Tube Adaptor
Brass Packing Nut
300 Series O-Ring Gasket
Stainless Steel Restraint Hook
Stainless Steel Limit Chain
45° bevel tip w/ alignment guide

Please see SP-Series or SP-100 data sheet (PDF) for more information.

A flexible hose assembly can be added to most sampling probes. Please see Flexible Hose Assembly page for more information.

*Brass Valve/Compression Shown, Stainless Steel also available, see ordering options below.

Ordering Information

Sample Part Number: SP-100-B-P-(Specify)-B-E

Series

Valve/Compression
Material

Sampling Probe
Material

Insertion Length

Tip Configuration

Ball Valve
Seal Type

Flexible Hose
Assembly

SP-100-

B =	Brass
S =	Stainless Steel

P =	PVC
S =	Stainless Steel

(Specify)

Note: PVC models have a maximum warranted insertion length of 6 inches.
Consult factory for lengths greater than 6 inches.

B =

45° Bevel

V =	Viton
E =	EPDM

See Flexible Hose Assembly product page for ordering options.

(Pressure ratings for flexible hose assemblies may differ from rating of the injector)

Technical Notes

1/2" PVC Solution Tubes are Schedule 80 pipe with an O.D. of 0.840 inches and an average I.D. of 0.526 inches.
1/2" Alloy Solution Tubes are Schedule 40 pipe with an O.D. of 0.840 inches and an average I.D. of 0.602 inches. Schedule 80 Alloy Solution Tubes are available upon request - consult factory for details.
Saf-T-Flo does not recommend nor warranty PVC/CPVC Solution Tubes where velocities in the process main exceed 6 fps.
No-Lead Brass is not available on Retractable Sampling Probes, select Stainless Steel instead as alternate.
Main Connection and Inlet Connection are NPT by default. BSP thread options are available. Consult factory for details.
Inlet Ball Valve will be same material as sampling probe.