| TRADE SHOW |  |
REQUEST FOR PROPOSAL | |
ENGINEER FEEDBACK | |
OPERATOR FEEDBACK | |
VISIT US ON |
|
PRODUCTS
Retractable Injectors Non-retractable Injection Quills
| No Check Valve (Standard) | With Check Valve | With Check Valve & Quick Release Coupling |
Standard Injection Quill – 150 psi rated (Plastic) • 1500 psi rated (Metallic)
Non-retractable injection quills have two male pipe threads for installation. Referencing the cut sheet; the lower male pipe thread is the main connection while the upper male thread connects to the pump discharge line via a coupling or tube fitting.
These units are excellent for smaller diameter main applications where a shutdown is possible, therefore allowing service of the quill to take place.
- Available in 1/2", 3/4" and 1" main connection sizes
- A Saf-T-Seal elastomeric tip is available on the EB-110 and the EB-111.
- Options and materials of construction not listed can be made available upon request but may require longer lead times.
| Model Number | Main Connection | Solution Tube (pipe) | Material of Construction | Saf-T-Seal Tip | |
| EB-110 |  |
1/2" | 3/8" | PVC, CPVC, Kynar®, SS, and Hastelloy C |
Optional |
| EB-111 |  |
3/4" | 1/2" | PVC, CPVC, Kynar®, SS, and Hastelloy C |
Optional |
| EB-113 | |
1" | 3/4" | PVC, CPVC, Kynar®, SS, and Hastelloy C |
n/a |