Specifications
SAFETY RATING
250 PSI
​
OPERATION
Retractable
​
VALVE SIZE
2"
​​​
​TUBE SIZE
1-1/2" (nominal)
​​​​​
PROCESS CONNECTION SIZE/TYPE
2" Male NPT​
​​​​
INLET SIZE/TYPE
1-1/2" Male NPT
​​
CHECK VALVE
Optional​
Ordering Options
Valve Material
HC-200
Valve Material
VALVE​
MATERIAL
​​
H = Alloy C
A = Alloy 20
D = Duplex
U = Super Duplex
Valve Material
TUBE
MATERIAL
​​​​​
H = C-276
A = Alloy 20
T = Titanium
Valve Material
INSERTION
LENGTH
​​​
Specify insertion length in inches.
Valve Material
TIP
CONFIG.
​​​
0 = Standard
B = Bevel
​DH = Diffuser Holes
Valve Material
CHECK VALVE
​​​​
00 = No Check
05 = Alloy, FKM
06 = Alloy, EPDM
Optional Check Valves
-
Spring Loaded Piston Type
-
.500 Cracking Pressure
-
FNPT Connections
-
Body Material Same As Tube Material Selection
Connections Made Easy
Hose Assemblies
A flexible connection between the injector and chemical supply line allows for retraction without having to break apart a series of unions and other fittings. This can improve the overall setup when it comes time for mainteance.
Technical Notes
-
Alloy solution tubes are 1-1/2" S40 Nominal Pipe Size (OD 1.900", ID 1.610")
-
When selecting alloy check valve options, the body material of the check valve will be the same as the selected valve material.
-
Materials options are subject to change. Consult factory prior to selection.
-
Diffuser hole configurations to be determined by customer. SAF-T-FLO does not provide recommendations regarding diffuser hole layouts.
-
Safety rating of 250 PSI
​