Specifications
SAFETY RATING
150 PSI
OPERATION
Retractable
VALVE SIZE
3/4"
TUBE SIZE
3/8" (nominal)
PROCESS CONNECTION SIZE/TYPE
3/4" Male
(Default NPT, AWWA optional with brass valve material)
INLET SIZE/TYPE
1/2" Male NPT (PVC, CPVC Tube Models)
3/8" Male NPT (Alloy Models)
CHECK VALVE
Integrated Spring Loaded Ball Check
OPTIONAL FEATURES
SAF-T-Seal Elastomeric Tip
Ordering Options
Valve Material
EB-145
Valve Material
VALVE
MATERIAL
B = Brass
S = Stainless Steel
Valve Material
TUBE
MATERIAL
P = PVC
C = CPVC
S = 316SS
H = C-276
A = Alloy 20
T = Titanium
Valve Material
INSERTION
LENGTH
Specify insertion length in inches. Note: PVC/CPVC have a maximum of 6".
Valve Material
TIP
CONFIG.
0 = Standard
B = Bevel
CV = SAF-T-Seal, FKM
CE = SAF-T-Seal, EPDM
Valve Material
CHECK VALVE SEAL
V = FKM
E = EPDM
K = FFKM
SAF-T-Seal Elastomeric Tip
Combat clogging and reduce maintenance.
Connections Made Easy
Hose Assemblies
A flexible connection between the injector and chemical supply line allows for retraction without having to break apart a series of unions and other fittings. This can improve the overall setup when it comes time for mainteance.
Technical Notes
-
PVC and CPVC solution tubes are 3/8" S80 Nominal Pipe Size (OD 0.675", ID 0.423").
-
Alloy solution tubes are 3/8" S40 Nominal Pipe Size (OD 0.675". 0.493")
-
Check valve spring cracking pressure is 10 PSI.
-
PVC and CPVC solution tubes are not suitable for process flows with velocities of 6 fps or greater.
-
Safety rating of 150 PSI