Specifications
SAFETY RATING
150 PSI
​
OPERATION
Retractable
​​
VALVE SIZE
1"
​
​TUBE SIZE
1/2" (nominal)
​​
PROCESS CONNECTION SIZE/TYPE
Male
(Default NPT, AWWA optional with brass valve material)
​
INLET SIZE/TYPE
1/2" Male NPT
CHECK VALVE
Integrated Spring Loaded Ball Check
​
OPTIONAL FEATURES
SAF-T-Seal Elastomeric Tip
Ordering Options
Valve Material
EB-146
Valve Material
VALVE​
MATERIAL
​​
B = Brass
S = Stainless Steel
Valve Material
TUBE
MATERIAL
​​​​​
P = PVC
C = CPVC
S = 316SS
H = C-276
A = Alloy 20
T = Titanium
Valve Material
INSERTION
LENGTH
​​​
Specify insertion length in inches. Note: PVC/CPVC have a maximum of 6".
Valve Material
TIP
CONFIG.
​​​
0 = Standard
B = Bevel
CV = SAF-T-Seal, FKM
CE = SAF-T-Seal, EPDM​
Valve Material
CHECK VALVE SEAL
​​​​
V = FKM
E = EPDM
M = FFKM
K = KALREZ 6375
SAF-T-Seal Elastomeric Tip
Combat clogging and reduce maintenance.
Connections Made Easy
Hose Assemblies
A flexible connection between the injector and chemical supply line allows for retraction without having to break apart a series of unions and other fittings. This can improve the overall setup when it comes time for mainteance.
Technical Notes
-
PVC and CPVC solution tubes are 1/2" S80 NPS.
-
Alloy solution tubes are 1/2" S40 NPS.
-
Check valve spring cracking pressure is 5 PSI.
-
PVC and CPVC solution tubes are not suitable for process flows with velocities of 6 fps or greater.
-
Safety rating references the pressure in the process line into which the injector is dosing.
​